China manufacturer TRAILER SPINDLE FOR 3,500 LB #84 AXLE WELD ON 1 1/2 INCH SQUARE axle cost

Product Description

Trailer Stub Axles

PN. Axle Size(P) Capacity Bearing Length(L)
TA026 40mm Round 750 kg LM custom-made
TA571 40mm Square 1000 kg LM custom-made
TA571 40mm Square 1100 kg Composite custom-made
TA571 45mm Round 1400 kg SL custom-made
TA030 45mm Square 1400 kg SL custom-made
TA031 50mm Square 1400 kg SL custom-made
TA032 50mm Square 1600 kg Parallel custom-made
TA033 50mm Square 2000 kg 2Ton custom-made
TA034 63mm Square 3000 kg 3Ton custom-made
TA035 65mm Square 3000 kg 3Ton custom-made

Trailer parts to suit a complete axle rebuild or partial replacement.

  • Hub kits to fit on a new or existing trailer axle 
  • Hub and stub kits that also include a weld on stub axle
  • Braked or non braked hubs, disc brakes or drum brakes to suit a range of applications
  • Wireless trailer brake controller systems
  • Non-braked hubs and braked hub options
  • Comprehensive spare parts, such as brake pads, stub axles, seal kits etc

This #84 3,500 lb trailer axle spindle is a weld-on spindle with 1 1/2 inch square butt that fits into a section of axle tubing to repair or replace a damaged or missing spindle. This spindle accommodates a 1 1/16 inch outer bearing, 1 3/8 inch inner bearing, and has a 1.72-inch inner diameter seal surface. The square butt spindles will generally fit into round axle tubing, which will generally be 2 3/8 inch diameter on 3,500 lb axles. This spindle specifically would be great for idler axles, or for a trailer that does not need a brake system, as there is no brake flange pre-welded CZPT the spindle.

 

If you need an accompanying hub for this spindle, you would need our Galvanized 3,500 lb Hub Kit, while if you plan to reuse your existing hubs you will just need a 3,500 lb Bearing Kit. This is a great product for repairing a broken spindle on an otherwise good axle or for building an axle from scratch if you have the experience to make these repairs or fabrications. You will need to use a Spindle Cotter Key to secure the 1″ – 14 Standard Spindle Castle Nut (not included) CZPT this spindle. 

 

Specifications

– 3500-pound steel #84 axle spindle

– Weld-on square butt end measures 1 1/2 inch Diameter x 4 inch Length

– 1 1/16″ (44649 bearing) x 1 3/8″ (68149 bearing) combination

– 1.72″ Inner Diameter seal surface

 

    HangZhou CZPT Machinery Co., Ltd is a professional manufacturer of trailer parts in HangZhou, ZHangZhoug Province, China since 2016.

     

    We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

    If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.

    Q1: Do you have factory?
    A: Yes, we have our own factory, own engineers, we can meet custom’s unique requirement.

    Q2: Can I have a sample order?
    A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

    Q3: It’s OK to print my logo on your product?
    A: Yes, we can according to your exact requirement.

    Q4:How do you ship the goods and how long does it take arrive?
    A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.

    Q5: What is your advantages?
    A: We are professional supplier for more than 10 years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.

    If you want to know about our products and us, welcome to enquiry and email me.thanks

    1-Welcome OEM

    1. You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.

    2-Our service

    1. You inquiry related to our products or prices will be replied in 24 hours.
    2. Well-trained and experienced staffs to answer all your enquirys in fluent English.
    3. Protection of your sales area, ideas of your design and all your private information.
    4. We have a QC team, every product will be checked by them before packed.

    3-Welcome to visit

    1. When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.

    4-Warranty

    1. Customer should be provide the video and the pictures for the problem products.
    2. Products returned within the warranty period must bear product number & date code.

    5-After service

    1. In production and after delivery, we will track on time and tell you goods situation.
    2. When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    Condition: New
    Axle Number: 2
    Application: Trailer
    Samples:
    US$ 3/Piece
    1 Piece(Min.Order)

    |

    Order Sample

    Customization:
    Available

    |

    Customized Request

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.







    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    axle spindle

    What are the torque specifications for securing an axle spindle to the suspension components?

    The torque specifications for securing an axle spindle to the suspension components can vary depending on the specific vehicle make, model, and year. It’s important to refer to the manufacturer’s documentation or service manual for the accurate torque specifications. Here is a detailed explanation:

    When installing or reassembling an axle spindle, it’s crucial to tighten the fasteners to the recommended torque specifications. This ensures proper clamping force and prevents issues such as overtightening, undertightening, or uneven loading. The torque specifications typically include values for the spindle nut, caliper bolts, and other related fasteners.

    Since torque specifications can differ among vehicle models and years, it’s best to consult the appropriate manufacturer’s documentation or service manual for the exact torque values. These resources provide detailed information specific to your vehicle, ensuring accurate and safe installation. The documentation may be available in print form from the vehicle manufacturer, or in digital form through online service portals or third-party publications.

    When referring to torque specifications, it’s essential to consider the following factors:

    • Torque Units: Torque specifications are typically provided in either foot-pounds (ft-lbs) or Newton-meters (Nm). Ensure that you are using the correct unit of measurement to avoid errors.
    • Torque Sequence: In some cases, the manufacturer may specify a specific sequence for tightening the fasteners. This sequence ensures even distribution of clamping force and proper alignment of components. Refer to the manufacturer’s documentation for any specified torque sequences.
    • Thread Lubrication: Depending on the specific application, the manufacturer may recommend the use of a specific lubricant or thread-locking compound on the fasteners. Follow the manufacturer’s recommendations regarding lubrication to achieve accurate torque values.
    • Re-Torqueing: In certain cases, the manufacturer may recommend re-torquing the fasteners after a specific mileage or driving time. This is done to account for any settling or relaxation that may occur in the components. Check the manufacturer’s documentation for any re-torqueing instructions.

    It’s worth emphasizing that using the correct torque specifications is crucial to ensure the integrity and safety of the axle spindle and related components. Incorrectly tightened fasteners can lead to issues such as wheel bearing damage, premature wear, or even component failure.

    If you are unsure about the torque specifications or lack the necessary tools and expertise, it is recommended to have a qualified mechanic or technician perform the installation or reassembly. They have the knowledge and experience to ensure that the axle spindle is secured with the appropriate torque, following the manufacturer’s specifications.

    In summary, the torque specifications for securing an axle spindle to the suspension components vary depending on the vehicle make, model, and year. It is essential to consult the manufacturer’s documentation or service manual for the accurate torque values, taking into account torque units, torque sequence, thread lubrication, and any re-torqueing instructions. When in doubt, seek professional assistance to ensure proper installation and safe operation of the axle spindle.

    axle spindle

    Can axle spindles be upgraded for improved performance, and if so, what are the options?

    Axle spindles can be upgraded to improve the performance of a vehicle, particularly in applications where higher strength, durability, or enhanced capabilities are desired. Upgrading axle spindles can provide benefits such as increased load capacity, improved off-road capability, or enhanced towing capabilities. Here are some options for upgrading axle spindles:

    • High-Strength Axle Spindles: One option is to replace the stock axle spindles with high-strength counterparts. High-strength axle spindles are typically made from stronger materials or feature reinforced designs to handle heavier loads or harsher conditions. These upgraded spindles can enhance the overall strength and durability of the axle assembly.
    • Performance Axle Spindles: Performance-oriented axle spindles are designed to improve the handling and responsiveness of the vehicle. These spindles may feature optimized geometry, reduced weight, or enhanced stiffness to provide better cornering abilities, reduced body roll, or improved steering precision. Performance axle spindles are commonly used in applications such as racing or high-performance vehicles.
    • Off-Road Axle Spindles: Off-road enthusiasts may opt for axle spindles specifically designed for rugged terrains. These spindles often have increased ground clearance, improved articulation, or additional reinforcement to withstand the demands of off-road driving. They can enhance the vehicle’s off-road capability, allowing for traversing challenging obstacles and rough terrain more effectively.
    • Towing and Hauling Axle Spindles: Upgraded axle spindles for towing or hauling purposes are engineered to handle heavier loads and provide increased stability. These spindles may have reinforced construction, larger bearings, or specialized features such as integrated trailer brake connections. Upgrading to towing or hauling axle spindles can enhance the vehicle’s towing capacity and improve overall towing performance.
    • Custom Axle Spindles: In some cases, custom axle spindles can be fabricated or modified to meet specific performance requirements. This option is typically utilized in specialized vehicle applications or when specific performance goals cannot be achieved with off-the-shelf upgrades. Custom axle spindles allow for tailored solutions that can address unique needs and performance objectives.

    When considering axle spindle upgrades, it is essential to ensure compatibility with other components of the axle assembly, such as bearings, hubs, and brakes. Upgrades may also require modifications to other parts of the vehicle, such as suspension systems or steering components, to optimize performance and maintain overall safety and reliability.

    It is recommended to consult with knowledgeable professionals, such as experienced mechanics, axle specialists, or vehicle customization experts, to determine the most suitable upgrade options for your specific vehicle and performance goals. They can provide guidance on selecting the appropriate axle spindle upgrades and ensure proper installation and integration into the vehicle’s overall system.

    axle spindle

    How does a damaged or bent axle spindle impact the performance of a vehicle?

    A damaged or bent axle spindle can significantly impact the performance and safety of a vehicle. Here’s a detailed explanation:

    When the axle spindle is damaged or bent, it can cause various issues that affect the overall performance and handling of the vehicle. Here are some ways a damaged or bent axle spindle can impact a vehicle:

    • Wheel Misalignment: A damaged or bent axle spindle can result in wheel misalignment. This misalignment can cause uneven tire wear, reduced traction, and compromised handling. The vehicle may pull to one side, and the steering may feel unstable or imprecise. Wheel misalignment can also lead to increased rolling resistance, negatively impacting fuel efficiency.
    • Vibration and Shaking: A bent axle spindle can cause vibrations and shaking in the vehicle, particularly at higher speeds. The imbalance created by the bent spindle can result in uneven tire rotation and wheel wobbling, leading to an uncomfortable and potentially unsafe driving experience.
    • Braking Issues: A damaged axle spindle can affect the performance of the braking system. Uneven wheel rotation caused by a bent spindle can result in inconsistent braking force distribution. This can lead to longer braking distances, reduced braking efficiency, and potentially compromised safety in emergency braking situations.
    • Suspension Component Stress: A damaged or bent axle spindle can place excessive stress on other suspension components, such as wheel bearings, control arms, or steering linkage. The misalignment and increased forces can accelerate wear and tear on these components, leading to premature failure and costly repairs.
    • Handling and Stability: A compromised axle spindle can negatively impact the vehicle’s handling and stability. It can cause unpredictable steering response, reduced cornering ability, and decreased overall stability during maneuvers. This can increase the risk of loss of control and accidents, especially in emergency or evasive driving situations.

    It’s important to address a damaged or bent axle spindle promptly. Continuing to drive with a damaged spindle can exacerbate the issues mentioned above and potentially cause further damage to other components of the suspension system. If you suspect a problem with the axle spindle, it’s recommended to have the vehicle inspected by a qualified mechanic or technician who can accurately diagnose the issue and perform the necessary repairs or replacement.

    In summary, a damaged or bent axle spindle can have a significant impact on the performance and safety of a vehicle. It can cause wheel misalignment, vibrations, braking issues, stress on suspension components, and compromised handling and stability. Prompt attention and repair are crucial to ensure the vehicle’s optimal performance and to maintain safety on the road.

    China manufacturer TRAILER SPINDLE FOR 3,500 LB #84 AXLE WELD ON 1 1/2 INCH SQUARE   axle costChina manufacturer TRAILER SPINDLE FOR 3,500 LB #84 AXLE WELD ON 1 1/2 INCH SQUARE   axle cost
    editor by CX 2024-04-26