China supplier High Performance Thrust Bearing 51105 Bearing Thrust Ball Bearing with high quality

Product Description

High performance thrust bearing 51105 bearing thrust ball bearing 51105 thrust roller bearing

Quick Details

Structure: Thrust
Type: Ball
Bore Size: 25 mm
Outside Diameter: 42 mm
Model Number: 51105
Precision Rating: PO P6 P5 P4 P2
Seals Type: ZZ, 2RS, RS, 2RS1
Number of Row: Single Row
Place of Origin: ZheJiang China (Mainland)
Material: : Chrome Steel, Carbon Steel, Stainless Steel, Plastic
Cage: Brass Cage, Nylon Cage, Iron Cage
Ball: : Chrome Steel
Vibration level: : V1, V2, V3
Noise level: : Z1, Z2, Z3
Clearance: : C2, C3, C4
Services: OEM customized services
Free Samples: Available
Stock: : Large

High performance thrust bearing 51105 bearing thrust ball bearing 51105 thrust roller bearing
1High quality
2Sample available

Thrust ball bearing consist of 2 precision chrome steel washers (ring) and a ball complement spaced by bronze retainer. They can be supplied with or without radius ball grooves in the rings. Thrust bearings are used under purely axial loads. Thrust ball bearings can handle loads in the axial direction only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the housing are called housing washers. Both washers contain raceways for the balls. Thrust ball bearings are available as both single and bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls. This center washer is located in the axial direction by a shaft shoulder and sleeve. Care must be taken in handling to prevent damage to the separable rings and ball assemblies.

Machine tool spindle, high-frequency motor, gas turbine, centrifuge, small car front wheel, differential pinion shaft, booster, food machinery, dividing head, fill welder, low-noise cooling tower, electrial equipment, painting equipment, machine groove boards, arc welding machine, pump, roots blower, air compressor, various types of transmission, fuel injection pump, printing machinery, planetary gearheads, extraction equipment, cycloid reducer, food packaging machinery, welder, electric iron, square box, strapping machine, axle, test analysis equipment, fine chemical machinery etc.

Frequently used models

Packaging & Delivery
Packaging Detail: Original package, plastic tube, box, carton, wooden case, etc
Delivery Detail: 5-15 days

51144 51230M 51115/P5 51138/P6
51148 51232 51115/P6 51138M/P5
51152 51232M 51115M/P4 51138M/P6
51156 51234 51116/P5 51140M/P5
51160 51234M 51116/P6 51140M/P6
51164 51236 51117/P5 51144/P5
51168 51236M 51117/P6 51144/P6
51206 51238 51118/P5 51148/P5
51207 51238J 51118/P6 51148/P6
51207/P5 51240 51118M/P4 51152/P5
51207/P6 51240J 51120/P5 51152/P6
51208 51244 51120/P6 51156/P5
51208M 51244J 51122/P5 51156/P6
51209 51244X2V 51122/P6 51168/P5
51210 51248 51124/P5 51168/P5
51211 51252 51124/P6 51208/P5
51212 51252J 51126/P5 51208/P6
51212M 51256 51126/P6 51209/P5
51213 51260 51128/P5 51209/P6
51214 51305 51128/P6 51210/P5
51214/YA8 51306 51128M/P5 51210/P6
51215 51307 51128M/P6 51211/P5
51216 51307/YA6 51130/P5 51211/P6
51217 51308 51130/P6 51212/P5
51218 51309 51130M/P5 51212/P6
51220 51310 51130M/P6 51213/P5
51220M 51311 51132M/P5 51213/P6
51222 51312 51132M/P6 51214/P5
51222M 51313 51134M/P5 51214/P6
51224 51314 51134M/P6 51215/P5
51224M 51314M 51136/P5 51215/P6
51226 51315 51136/P6 51216/P5
51228 51316 51136M/P5 51216/P6
51228M 51317 51136M/P6 51217/P5
51230 51317M 51138/P5 51217/P6

Contact Us


Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.

Disc brake mounting interfaces that are splined

There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China supplier High Performance Thrust Bearing 51105 Bearing Thrust Ball Bearing     with high qualityChina supplier High Performance Thrust Bearing 51105 Bearing Thrust Ball Bearing     with high quality